1+1 fully auto face mask machine with servo motor
The equipment is used to produce disposable non-woven mask. The equipment ismainly composed of feeding, shaping, welding, cutting, connecting and transferring,polar ear welding, blanking and stacking, etc. In addition to manual feeding, the wholeprocess from the raw material feeding to the nose rib insertion edge cutting finishedproduct stacking is fully automatic operation. The machine can be combined by onepull one or one pull two pole ear welder to meet different production capacityrequirements.
1 set of masks folding machine
1 set of welding machine with ear rope
L 7050 X W 3800 X H 2000 mm
Keep at least 0.7 around the machine Space over meters
9.0m x 4.5m
The user shall provide independent plant facilities and be responsible for the connection of external pipelines of the equipment. The power supply needs independent switch.
Φ6 air tube
The distance between the equipment and the wall shall not be less than 900mm
Temperature and humidity
Room temperature: 25 ℃± 5 ℃, humidity: ≤ 40%
Ground bearing capacity
Ground bearing requirement ≥ 450kg / m2
Place of use
No flammable and explosive gas, liquid or solid around
Flatness of floor ≤ 5mm / 2m
Safety protection: leakage protection switch, emergency stop button; Operation protection: Vacuum manual operation switch, anti positive pressure explosion box structure; Warning function: audible and visual alarm and touch screen reminder function
There are voltage, power, volume and other marks on the nameplate.
The contents and identifications of packing cases, instructions and nameplates shall conform to the general rules for the use of consumer goods (gb5296.2)
· Package printing content is consistent with design drawings
· Handle with care during handling to prevent rain and snow from getting wet
· Store in a well ventilated warehouse free of corrosive gases