Gypsum block machineGypsum Block Introduction:
Gypsum is the main raw material of gypsum block, after mixing with water, then pour the slurry into shaper, after drying and then make light of the building gypsum products. You also can add the lightweight aggregate, fiber reinforced materials, foam and other supporting material in the production according to the performance requirements.
1. Normally specification of the gypsum block
500 mm × 666mm ×60mm
500 mm × 666mm × 80mm
500 mm × 666mm × 100mm (solid, hollow) Hollow rate: 32%
2:Gypsum Block production line Capacity List
3:Gypsum block production line description:
It adopts PLC control system. It can control the feeding machine, batching system, blender, molding machine, the central hydraulic station, pneumatic telescopic fixture, and other equipment according to the production requirements, it can guarantee the product quality and production efficiency.
Gypsum blocks production line consists of batch system, blending machine, forming machine, central hydraulic section, holding unit, machinery clamp and PLC controller .It adopts international advanced technology of hydraulic top rising of vertical mold forming and PLC controller . The gypsum blocks forming is being realized by full-automation, high-quality and accuracy . Our company makes forming machinery for gypsum blocks of both hollow and solid
Consisting of water metering device, powder metering device, compressed air systems and chassis and other components.
Consisting of the mixer rack, stainless steel mixing tank, stainless steel openable top cover, the water pipe installed on the roof, stirrer and pouring cylinder which are equiped with with motor, etc.
3. Forming machine
The mold material adopts alloy steel that is electroplated with thick enough hard chrome on its surface and is mirror-polished. Then with high manufacturing accuracy and a fine adjustment structure of block dimensions to make sure all the blocks produced are of high precision, excellent surface finish, and also long life-span of the mold.
4. Central hydraulic station
Including high and low pressure oil pump and drive motor, fuel tank (with oiler, liquid level indicator, hook, etc.), electromagnetic valve, one-way throttle valve,etc.
5. Pneumatic flexible fixture
Pneumatic flexible fixture-on-rails: install fixturing trolley with wheels on two rails. The trolley can move at high or low speed, advance and retreat, and has the functions of brake positioning.
6. Automatic control system
The system uses programmable logic controller (PLC), and is composed of a button box, an electric control cabinet and other devices near the operators.
Gypsum block machine
4. Gypsum block drying kiln
The main drying kiln adopts a tunnel kiln with air inlet at the bottom and air outlet at the top (single channel). The heat source adopts diesel burner flame heat exchange, centrifugal fan forced circulation and independent moisture drainage. Kiln car steering using steering and jacking device, kiln body outside набор up an empty car back lane and a heavy truck unloading lane.
The air circulation system of drying kiln adopts directional circulation of forced large flow hot air to independently control temperature and air volume and improve drying effect.
Air supply adopts underfeed air: the fan blows hot air into the air duct from the tail and evenly supplies the air through the evenly drilled air distribution plate to form a hot air flow from bottom to top in the kiln.
Drainage from the upper: after the hot air blown from the air distribution board is exchanged with the wet gypsum block from bottom to top, part of the low temperature air with moisture will be discharged by the kiln top drainage fan.