Fully auto face mask machine with servo motor

Fully auto face mask machine with servo motor

2020-09-17 08:41:07   207

Face mask machineTotal power:3KWSize:4525*750*1808mmPower supply: 380V 50HZUltrasonic frequency:20KHZOutput :100 -120 pcs/min Feeding frame, lamination forming mechanism, nose wire feeding mechanism,

Welcome to DEYI group

1+1 fully auto face mask machine with servo motor

1.Equipment Introduction:

The equipment is used to produce disposable non-woven mask. The equipment ismainly composed of feeding, shaping, welding, cutting, connecting and transferring,polar ear welding, blanking and stacking, etc. In addition to manual feeding, the wholeprocess from the raw material feeding to the nose rib insertion edge cutting finishedproduct stacking is fully automatic operation. The machine can be combined by onepull one or one pull two pole ear welder to meet different production capacityrequirements.

 

2.Main Specifications:

No.

Item

Single lane

Remarks

1

Model

1 set of masks folding machine

1 set of welding machine with ear rope

2

Capacity

60-80 pcs/min


3

Equipment Dimension

L 7050 X W 3800 X H 2000 mm

Keep at least 0.7 around the machine Space over meters

4

Space require

9.0m x 4.5m


5

Interface

Power

220V,50/60Hz,single phase

The user shall provide independent plant facilities and be responsible for the connection of external pipelines of the equipment. The power supply needs independent switch.

 

Compressed

air interface

Φ6 air tube

6

Energy consumption

maximum power

10KW


compressed air

0.5~0.6MPa,


7

Conditions

of use

Space

The distance between the equipment and the wall shall not be less than 900mm


Temperature and humidity

Room temperature: 25 ± 5 , humidity: ≤ 40%


Ground bearing capacity

Ground bearing requirement ≥ 450kg / m2


Place of use

No flammable and explosive gas, liquid or solid around


Ground flatness

Flatness of floor ≤ 5mm / 2m


8

Safety

Safety protection: leakage protection switch, emergency stop button; Operation protection: Vacuum manual operation switch, anti positive pressure explosion box structure; Warning function: audible and visual alarm and touch screen reminder function


 

 

9

Remarks

There are voltage, power, volume and other marks on the nameplate.

The contents and identifications of packing cases, instructions and nameplates shall conform to the general rules for the use of consumer goods (gb5296.2)


10

Packaging storage

· Package printing content is consistent with design drawings

· Handle with care during handling to prevent rain and snow from getting wet

· Store in a well ventilated warehouse free of corrosive gases





The equipment is used to produce disposable non-woven mask. The equipment ismainly composed of feeding, shaping, welding, cutting, connecting and transferring,polar ear welding, blanking and stacking, etc. In addition to manual feeding, the wholeprocess from the raw material feeding to the nose rib insertion edge cutting finishedproduct stacking is fully automatic operation. The machine can be combined by onepull one or one pull two pole ear welder to meet different production capacityrequirements.


The equipment is used to produce disposable non-woven mask. The equipment ismainly composed of feeding, shaping, welding, cutting, connecting and transferring,polar ear welding, blanking and stacking, etc. In addition to manual feeding, the wholeprocess from the raw material feeding to the nose rib insertion edge cutting finishedproduct stacking is fully automatic operation. The machine can be combined by onepull one or one pull two pole ear welder to meet different production capacityrequirements.


The equipment is used to produce disposable non-woven mask. The equipment ismainly composed of feeding, shaping, welding, cutting, connecting and transferring,polar ear welding, blanking and stacking, etc. In addition to manual feeding, the wholeprocess from the raw material feeding to the nose rib insertion edge cutting finishedproduct stacking is fully automatic operation. The machine can be combined by onepull one or one pull two pole ear welder to meet different production capacityrequirements.


Inquiry
Email
Map
QQ