1. Technical Data
The below data might be a little changeable upon field conditions and manpower.
Output | 40-50 pcs/min |
Applicable materials | pp non-woven composite fiber PP |
Output / day | 55,000-70,000 pcs / day |
Machine weight | 1200 kg |
Machine size | 6000*2400*1800mm |
Machine Material | 100% Aluminum alloy |
Compressed-Air | 4-6kg/cm2 |
Welding for Ear loop | 20-40MHZ |
Total electric consumption | 6 KW |
Voltage | 220V/50Hz |
Voltage tolerance | ±5% |
2. Scope of Buyer’s Responsibility
The ambient temperature is required to be at room temperature.
The humidity requirement is 40% -80%. No dew condensation should be installed.
Power supply grid fluctuation: ± 5%, and the ground wire of the grid meets international requirements. In areas with a voltage amplitude of more than 5%, an electronic automatic voltage stabilization and current stabilization device should be installed.
There should be no strong electromagnetic signal interference near the installation equipment. Avoid radio transmitting stations (or relay stations) around the installation site.
Ground amplitude: less than 50um; vibration acceleration: less than 0.05g. Avoid having a large number of machine tools and equipment nearby. Equipment space requirements must be smoke-free and dust-free, and avoid dusty working environments such as metal polishing.
Air pressure: ≥0.6MPa.
In some environments, antistatic flooring and shielding should be installed.
►Machine Photo
1. Technical data
The below data might be a little changeable upon field conditions and manpower.
Output per minute | 40-50 pcs/min |
Applicable materials | PP nonwoven fabric and meltblown fabric |
Output per day | 55,000-70,000 pcs / day |
Machine weight | 1200 kg |
Machine dimensions | 6000*2400*1800mm |
Machine material | 100% Aluminum alloy |
Compressed air pressure | 4-6kg/cm2 |
Ear loop welding | 20–40 MHz ultrasonic system (source frequency requires confirmation) |
Total electrical power | 6 KW |
Voltage | 220V/50Hz |
Voltage tolerance | ±5% |
2. Scope of Buyer’s Responsibility
The ambient temperature is required to be at room temperature.
The humidity requirement is 40% -80%. No dew condensation should be installed.
Power supply grid fluctuation: ± 5%, and the ground wire of the grid meets international requirements. In areas with a voltage amplitude of more than 5%, an electronic automatic voltage stabilization and current stabilization device should be installed.
There should be no strong electromagnetic signal interference near the installation equipment. Avoid radio transmitting stations (or relay stations) around the installation site.
Ground amplitude: less than 50um; vibration acceleration: less than 0.05g. Avoid having a large number of machine tools and equipment nearby. Equipment space requirements must be smoke-free and dust-free, and avoid dusty working environments such as metal polishing.
Air pressure: ≥0.6MPa.
In some environments, antistatic flooring and shielding should be installed.
►Machine Photo
1. Technical data
The below data might be a little changeable upon field conditions and manpower.
Output per minute | 40-50 pcs/min |
Applicable materials | PP nonwoven fabric and meltblown fabric |
Output per day | 55,000-70,000 pcs / day |
Machine weight | 1200 kg |
Machine dimensions | 6000*2400*1800mm |
Machine material | 100% Aluminum alloy |
Compressed air pressure | 4-6kg/cm2 |
Ear loop welding | 20–40 MHz ultrasonic system (source frequency requires confirmation) |
Total electrical power | 6 KW |
Voltage | 220V/50Hz |
Voltage tolerance | ±5% |
2. Scope of Buyer’s Responsibility
The ambient temperature is required to be at room temperature.
The humidity requirement is 40% -80%. No dew condensation should be installed.
Power supply grid fluctuation: ± 5%, and the ground wire of the grid meets international requirements. In areas with a voltage amplitude of more than 5%, an electronic automatic voltage stabilization and current stabilization device should be installed.
There should be no strong electromagnetic signal interference near the installation equipment. Avoid radio transmitting stations (or relay stations) around the installation site.
Ground amplitude: less than 50um; vibration acceleration: less than 0.05g. Avoid having a large number of machine tools and equipment nearby. Equipment space requirements must be smoke-free and dust-free, and avoid dusty working environments such as metal polishing.
Air pressure: ≥0.6MPa.
In some environments, antistatic flooring and shielding should be installed.
►Machine Photo
1. Technical data
The below data might be a little changeable upon field conditions and manpower.
Output per minute | 40-50 pcs/min |
Applicable materials | PP nonwoven fabric and meltblown fabric |
Output per day | 55,000-70,000 pcs / day |
Machine weight | 1200 kg |
Machine dimensions | 6000*2400*1800mm |
Machine material | 100% Aluminum alloy |
Compressed air pressure | 4-6kg/cm2 |
Ear loop welding | 20–40 MHz ultrasonic system (source frequency requires confirmation) |
Total electrical power | 6 KW |
Voltage | 220V/50Hz |
Voltage tolerance | ±5% |
2. Scope of Buyer’s Responsibility
The ambient temperature is required to be at room temperature.
The humidity requirement is 40% -80%. No dew condensation should be installed.
Power supply grid fluctuation: ± 5%, and the ground wire of the grid meets international requirements. In areas with a voltage amplitude of more than 5%, an electronic automatic voltage stabilization and current stabilization device should be installed.
There should be no strong electromagnetic signal interference near the installation equipment. Avoid radio transmitting stations (or relay stations) around the installation site.
Ground amplitude: less than 50um; vibration acceleration: less than 0.05g. Avoid having a large number of machine tools and equipment nearby. Equipment space requirements must be smoke-free and dust-free, and avoid dusty working environments such as metal polishing.
Air pressure: ≥0.6MPa.
In some environments, antistatic flooring and shielding should be installed.
►Machine Photo
